Powered Studio Monitor

Subwoofer Speaker 8 inch Replacement For JBL LSR 4328P Powered Studio Monitor


Subwoofer Speaker 8 inch Replacement For JBL LSR 4328P Powered Studio Monitor
Subwoofer Speaker 8 inch Replacement For JBL LSR 4328P Powered Studio Monitor
Subwoofer Speaker 8 inch Replacement For JBL LSR 4328P Powered Studio Monitor

Subwoofer Speaker 8 inch Replacement For JBL LSR 4328P Powered Studio Monitor    Subwoofer Speaker 8 inch Replacement For JBL LSR 4328P Powered Studio Monitor

Subwoofer Speaker 8 inch 1PCS. (all parameters apply to LSR4328P and LSR4326P unless otherwise specified). Frequency response (+/ -1.5db) 50hz-20khz (LSR4328P). 55 hz - 20 KHZ (LSR4326P). Box resonance frequency 41Hz (LSR4328P).

Low frequency extended user control is set to default. 43 hz - 3 db - 22 KHZ (LSR4328P). 47 hz - 22 KHZ (LSR4326P). 10 db 35 hz - 32 KHZ (LSR4328P).

39 hz - 32 KHZ (LSR4326P). Low - high frequency frequency division digital frequency division: 2.6k 4th order BW LF/ 4th order BW HF (LSR4328P). Digital frequency division: 2.8k 4th order BW LF/ 2nd order BW HF (LSR4326P).

Maximum continuous sound pressure level 106dB/1m. The maximum peak sound pressure level is 112dB/1m.

The maximum peak sound pressure level per pair is 118dB SPL/1m. Diameter: 203 mm (8 in) (LSR4328P).

159 mm (6.25 in) (LSR4326P). Voice coil 2 (51 mm) (LSR4328P). 1.5 (38 mm) (LSR4326P). Paper basin type polymer coated paper fiber. Magnet type neodymium, integral radiator cover.

Other properties ellipse similar to spherical waveguide. Low frequency topology class A-B monolithic circuit. Sinusoidal power ratio 150w rated impedance. High frequency topology class A-B monolithic circuit.

Sine wave power ratio 70w rated impedance. Ac input voltage 115VAC, 60Hz (230VAC, 50hz -- models LSR4328P/230 and LSR4326P/230). 1/8th power ratio 13w (LSR4326P), 18w (LSR4328P). Full load power 100 hours, IEC noise, 6dB peak factor. Rated power ac at 1/8th power IEC powder noise, 60w.

Max current ac at Max power output (audio) 120VACE line2.2a. Fuse value 5A, 250VAC, delay (LSR4328P, LSR4326P).

2.5a, 250VAC, time delay (LSR4328P/230, LSR4326P/230). XLR input optional +4dBu/ -10dbv. The input impedance is 10K. The forward voltage applied to XLR pin 2 produces an outward bass motion. 1/4 inch TRS input balanced or non-balanced, optional +4dBu/ -10dbv.

The input impedance is 20K. The forward voltage applied to the 1/4 "tip" produces an outward bass movement. AD conversion 96kHz, 24Bit, 64x oversampling. Calibrate input sensitivity to simulate XLR and 1/4 +4dBu: 94dB SPL/1m.

10 DBV: 94 db SPL / 1 m. RCA input S/PDIF (EIAJ CP1201).

RCA output S/PDIF (EIAJ CP1201). Digital input sampling rate: 96k Hz, 88.2khz, 48khz, 44.1khz, 32khz. The digital input is 24 bits long.

RMC microphone input (use only the provided microphone) 1/8 TRS. Network connection RJ45 input, RJ45 output. ON the front panel control, SOLO, RMC, EQ ON, LF, HF, PRESET, INPUT, + /. RMC filter ranges from 20hz-160hz to 73 frequency points (in the 1/24th octave), with a variable Q value from 1 (1.4 octave bandwidth) to 16 1/11th octave bandwidth, attenuation from 3 to.

LF EQ factory default: 500Hz self-shielding, +/-2dB, 1/4db increment. 137 corner frequencies between 19.7Hz and 1kHz can be accessed through LSR4300 control center software. HF EQ factory default: 2kHz self-shielding, +/ -2db, 1/4db increment. 104 corner frequencies between 1kHz and 20.2khz can be accessed through the LSR4300 control center software. Default 1-6 factory/user default plus NULL. LSR4300 control center software can be used for storage. AES/the EBU A and B.

+/- default: system volume control: 0dB to dB secondary function: increment/decrement of selected function. Back panel control input sensitivity +4dBU/ -10dbv.

8 speakers ID DIP switch Left, Right, Center, Left Surround, Right Surround, Center Surround, Left Extra, Right Extra. The front panel displays 31 segments of LED dBFS display and setting instructions. Front panel header -70dBFS0dBFS + clipping.

The back panel displays a 5LED indicator speaker ID selection. Two handles, insert Settings on both sides. Install 4 threaded mounting points to square industry standard, 107.9mm x 50.8mm (4 1/4 "x 2") M6 metric threads. Low frequency diversion port back opening linear dynamic hole.

Acoustic structure incident mode structure ABS. Box structure 19mm (3/4in)MDF. Net weight 5kg (32.5lbs) (LSR4328P).

13 kg (28.5 LBS) (LSR4326P). Dimensions (WxHxD) 267 mm x 438 mm x 269 mm (10.5 "x 17.25" D x 10.6) (LSR4328P).

236 mm x 387 mm x 262 mm (9.3 "x 15.25" x 10.3) (LSR4326P). The item "Subwoofer Speaker 8 inch Replacement For JBL LSR 4328P Powered Studio Monitor" is in sale since Tuesday, June 15, 2021. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Speakers". The seller is "sandymobile" and is located in Joliet, Illinois 60433-3280.

This item can be shipped worldwide.

  1. Model: JBL LSR 4328P
  2. Type: speaker Subwoofer Speaker
  3. MPN: Does Not Apply
  4. Brand: JBL LSR 4328P
  5. Connectivity: Wired


Subwoofer Speaker 8 inch Replacement For JBL LSR 4328P Powered Studio Monitor    Subwoofer Speaker 8 inch Replacement For JBL LSR 4328P Powered Studio Monitor